Oct 29, 2008 by tycoonman | Posted in Hobbies & Crafts
first you need to take off the servo horn. then turn on you remote and car and turn the steering trim knob on the remote to neutral. turn it all off and reinstall the horn as straight as you can( so the wheels are pointing straight ahead) and that should do the job.
BUCKY | Oct 30, 2008
How do I wire a new traxxas transmitter and receiver to my battery and servos?
Aug 02, 2007 by nick d | Posted in Other - Electronics
I have a traxxas 2019 receiver and a Top Qualifier transmitter and 2 traxxas 2018 servos, 1 traxxas battery pack and 2 yellow crystals. From my receiver i have my battery and my two servos in the correct slots. i put in my crystals and try it but nothing happens. please tell me if there is a speacial way to put in the crystals or something else.
I assume both unit use the same xtal. sometimes units use a xmit xtal and a rcv xtal. verify that. obviously if the xtals came with the unit and are not marked xmit and rcv then u are good to go. If they are verify they are in the right unit.
u have things in the right slots - verify that.
the battery is connected properly + to +, - to -. verify that
power is turned on to both units.
xmit controls are centered.
if it still doesn't work, the first thing to verify is power from the battery with the unit on, under load.
then power ON the boards. that is a little harder.
the next thing to do is to see if u can get another xmit to drive the rcv.
and vise-versa.
good luck
Bill R | Aug 03, 2007
I have a Traxxas Rustler, and I took off the shocks and turning servo, and put it all back together.?
Oct 29, 2008 by tycoonman | Posted in Hobbies & Crafts
NOW IT ONLY TURNS ONE WAY! Please help! 10 PTS!!!
It sounds like you did not get the servo correctly centered.
This is what happens when you don't pay attention to what you are doing!
f100_supersabre | Oct 29, 2008
Traxxas System Not working????
Apr 07, 2008 by nick d | Posted in Hobbies & Crafts
I have a traxxas tq transmitter and a 2019 receiver, a 6 volt battery box to run it and yellow and blue crystals. There are two servos, 1 2018 traxxas servo and a team losi Z270 racing servo. When i put the batteries in the transmitter the light goes on and when i turn on the receiver im getting power from the terminals, but it wont work, why???
you say you have two different crystals a blue and yellow you need the same colors blue to blue yellow to yellow there matched frequency's here's a site to help explain better for you
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTG62&P=0
almost to the bottom, you have done good trouble shooting but your crystals are not matched
Have Fun
Dan
Dan A | Apr 08, 2008
Traxxas Remote Not working???
Apr 07, 2008 by nick d | Posted in Other - Electronics
I have a traxxas tq transmitter and a 2019 receiver, a 6 volt battery box to run it and yellow and blue crystals. There are two servos, 1 2018 traxxas servo and a team losi Z270 racing servo. When i put the batteries in the transmitter the light goes on and when i turn on the receiver im getting power from the terminals, but it wont work, why???
i know a great site where you can get pretty much anything traxxas relatyed answered
www.traxxaddicts.com
traxxaddicts.com | Apr 10, 2008
Array
This is what i did to fix mine. I cant guarantee this will work but it will at least give your servo a fighting chance
Fortunately, Traxxas supplies the Slash with a waterproof servo, radio box, and ESC. Stephen will show you how the technical cleaning process is performed… Stephen prepping project SandStorm for it's day at the beach. Now if it was only that easy to
Traxxas 2080 Micro Servo, Waterproof:1/16 SLH, ERV 
